Resource Management Installation

From Gcube Wiki
Revision as of 11:01, 2 October 2009 by Lucio.lelii (Talk | contribs) (→‎Instance Configuration)

Jump to: navigation, search

gHNManager

Installation

The gHNManager is a Local Service shipped and installed within the gHN distribution.

gHN Configuration

No specific configuration is needed, but the usual gHN's one

Instance Configuration

The service instance does not require any specific configuration. As Local Service, it automatically joins all the gHN scopes.

Verify the Installation

Once the gHN is started, the $GLOBUS_LOCATION/nohup.out file has to report (among the others) the following portType: 

gHN started at: http://host:port/wsrf/services/ with the following services:

GCUBE SERVICES:
...
[3]: http://host:port/wsrf/services/gcube/common/vremanagement/GHNManager
...


Looking at the $GLOBUS_LOCATION/logs/container.fullog, the following messages related to the gHNManager initialisation have to be observed: 

2009-07-06 16:08:04,329 INFO  contexts.ServiceContext [GHNManager-Initialiser,info:78] [0.0s] GHNManager: Added scope(s) [/testing]
2009-07-06 16:08:04,329 INFO  contexts.ServiceContext [GHNManager-Initialiser,info:78] [0.0010s] GHNManager: INITIALISING RUNNING INSTANCE
2009-07-06 16:08:04,479 TRACE contexts.ServiceContext [GHNManager-Initialiser,trace:82] [0.151s] GHNManager: loading RI profile
2009-07-06 16:08:04,490 INFO  contexts.ServiceContext [GHNManager-Initialiser,info:78] [0.162s] GHNManager: Added scope(s) [/testing, /testing/vo1]
2009-07-06 16:08:04,495 INFO  contexts.ServiceContext [GHNManager-Initialiser,info:78] [0.167s] GHNManager: managing security with a GCUBESimpleServiceSecurityManager
2009-07-06 16:08:04,497 INFO  contexts.ServiceContext [GHNManager-Initialiser,info:78] [0.169s] GHNManager: managing remote persistence with a GCUBERINoPersistenceManager
2009-07-06 16:08:04,500 INFO  contexts.GHNContext [GHNManager-Initialiser,info:78] [0.997s] GHNContext: REGISTERED RI OF (VREMANAGEMENT,GHNMANAGER)
2009-07-06 16:08:04,538 INFO  contexts.ServiceContext [GHNManager-Initialiser,info:78] [0.21s] GHNManager: moved to status INITIALISED
2009-07-06 16:08:04,542 DEBUG contexts.ServiceContext [GHNConsumer$<anon>,debug:66] [0.0s] GHNManager: UPDATE event received
2009-07-06 16:08:04,744 INFO  contexts.ServiceContext [GHNManager-Subscriber,info:78] [0.0s] GHNManager: registering for GHN shutdown events
2009-07-06 16:08:04,745 INFO  contexts.ServiceContext [GHNManager-Subscriber,info:78] [0.0010s] GHNManager: registering for GHN scope events as a local service
2009-07-06 16:08:04,790 TRACE impl.GHNManager [PortTypeConsumer,trace:82] [0.0s] GHNManager: INITIALISING PORTTYPE GHNMANAGER

Afterward, per each gHN scope, the following messages related to the gHN profile publication have to be reported in the same log file: 

2009-07-06 16:08:04,542 DEBUG contexts.ServiceContext [GHNConsumer$<anon>,debug:66] [0.0s] GHNManager: UPDATE event received
2009-07-06 16:08:04,544 DEBUG contexts.ServiceContext [GHNConsumer$<anon>,debug:66] [0.0020s] GHNManager: Publishing GHN profile in scope /testing
2009-07-06 16:08:04,551 TRACE impl.GCUBEProfileManager [GHNConsumer$<anon>,trace:82] GCUBEProfileManager: Trying to update resource with ID=0722bbe0-50f5-11de-aea3-d209846ff30b in 
scope /testing
2009-07-06 16:08:04,586 TRACE scope.GCUBEScopeManagerImpl [GHNConsumer$<anon>,trace:82] GCUBEScopeManagerImpl: Setting scope /testing in Thread[GHNConsumer$<anon>,5,main]
2009-07-06 16:08:04,586 INFO  tasks.ISRegistryServiceUpdaterHandler [GHNConsumer$<anon>,info:78] ISRegistryServiceUpdaterHandler: looking for instances of ISRegistry ServiceHandler
2009-07-06 16:08:04,587 TRACE tasks.ISRegistryServiceUpdaterHandler [GHNConsumer$<anon>,trace:82] ISRegistryServiceUpdaterHandler: Refreshing Registry instances
2009-07-06 16:08:04,588 TRACE tasks.ISRegistryLookup [GHNConsumer$<anon>,trace:82] ISRegistryLookup: Querying the IS for Registry instances
2009-07-06 16:08:05,102 TRACE tasks.ISRegistryServiceUpdaterHandler [GHNConsumer$<anon>,trace:82] ISRegistryServiceUpdaterHandler: Connecting to the IS-Registry instance 
located at http://grid10.4dsoft.hu:8080/wsrf/services/gcube/informationsystem/registry/RegistryFactory...
2009-07-06 16:08:05,244 INFO  contexts.GCUBERemotePortTypeContext$1 [GHNConsumer$<anon>,info:78] : Preparing call to service InformationSystem,IS-Registry in scope /testing 
2009-07-06 16:08:05,592 TRACE impl.GCUBEProfileManager [GHNConsumer$<anon>,trace:82] GCUBEProfileManager: Resource with ID=0722bbe0-50f5-11de-aea3-d209846ff30b successfully updated

Deployer

Installation

The Deployer is a Local Service shipped and installed within the gHN distribution.

gHN Configuration

No specific configuration is needed, but the usual gHN's one.

Instance Configuration

The service instance does not require any specific configuration. As Local Service, it automatically joins all the gHN scopes.

Verify the Installation

Once the gHN is started, the $GLOBUS_LOCATION/nohup.out file has to report (among the others) the following portType: 

gHN started at: http://host:port/wsrf/services/ with the following services:
 
GCUBE SERVICES:
...
[3]: http://host:port/wsrf/services/gcube/common/vremanagement/Deployer
...

Looking at the $GLOBUS_LOCATION/logs/container.fullog, the following messages related to the Deployer initialisation have to be observed: 

2009-07-06 16:08:05,538 INFO  contexts.ServiceContext [Deployer-Initialiser,info:78] [0.0s] Deployer: Added scope(s) [/testing]
2009-07-06 16:08:05,538 INFO  contexts.ServiceContext [Deployer-Initialiser,info:78] [0.0s] Deployer: INITIALISING RUNNING INSTANCE
2009-07-06 16:08:05,539 TRACE contexts.ServiceContext [Deployer-Initialiser,trace:82] [0.0010s] Deployer: loading RI profile
2009-07-06 16:08:05,542 INFO  contexts.ServiceContext [Deployer-Initialiser,info:78] [0.0040s] Deployer: Added scope(s) [/testing, /testing/vo1]
2009-07-06 16:08:05,543 INFO  contexts.ServiceContext [Deployer-Initialiser,info:78] [0.0050s] Deployer: managing security with a GCUBESimpleServiceSecurityManager
2009-07-06 16:08:05,543 INFO  contexts.ServiceContext [Deployer-Initialiser,info:78] [0.0050s] Deployer: managing remote persistence with a GCUBERINoPersistenceManager
2009-07-06 16:08:05,544 INFO  contexts.GHNContext [Deployer-Initialiser,info:78] [0.0s] GHNContext: REGISTERED RI OF (VREMANAGEMENT,DEPLOYER)
2009-07-06 16:08:05,544 INFO  impl.ServiceContext [VREModeler-Subscriber,info:78] [0.0s] VREModeler: registering for GHN shutdown events
2009-07-06 16:08:05,545 INFO  impl.ServiceContext [VREModeler-Subscriber,info:78] [0.0s] VREModeler: registering for GHN scope removal events
2009-07-06 16:08:05,545 INFO  contexts.ServiceContext [Deployer-Initialiser,info:78] [0.0070s] Deployer: moved to status INITIALISED
2009-07-06 16:08:05,550 INFO  contexts.ServiceContext [Deployer-Subscriber,info:78] [0.0s] Deployer: registering for GHN shutdown events
2009-07-06 16:08:05,550 INFO  contexts.ServiceContext [Deployer-Subscriber,info:78] [0.0010s] Deployer: registering for GHN scope events as a local service
2009-07-06 16:08:05,551 TRACE impl.Deployer [PortTypeConsumer,trace:82] [0.0s] Deployer: INITIALISING PORTTYPE DEPLOYER

VREManager

Installation

The VREManager is typically installed in two ways:

  • statically, for infrastructure and VO scopes
here the service is deployed on a gHN as any other gCube Service by typing:
gcore-deploy-service <path>/org.gcube.vremanagement.vremanager.gar
The command above assumes that the $GLOBUS_LOCATION/bin folder is in your PATH
  • dynamically, for VRE scopes
in this case, it is the VREModeler service that takes care of the installation and its settings. Typically, the VREManager is installed as first step of the VRE creation process.

gHN Configuration

No specific configuration is needed, but the usual gHN's one.

Instance Configuration

The VREManager is a scope-specific service, meaning that it must join one and only one scope. Therefore, it must be configured properly to behave in the assigned scope. In the case of a dynamically deployed instance, the appropriate configuration is automatically done by the Deployer service.

In the case of a statically deployed instance, its JNDI file ($GLOBUS_LOCATION/etc/org.gcube.vremanagement.vremanager/jndi-config.xml) must be configured to join only one scope. In the following example, the instance (startScopes environment variable) is configured to join the scope named /testing/vo1: 

<jndiConfig xmlns="http://wsrf.globus.org/jndi/config">
     <service name="gcube/vremanagement/VREManager/service">
         <environment
              name="configDir"
              value="etc/org.gcube.vremanagement.vremanager"
              type="java.lang.String"
              override="false" />
 
         <environment
              name="securityManagerClass"
              value="org.gcube.common.core.security.GCUBESimpleServiceSecurityManager"
              type="java.lang.String"
              override="false" />
 
         <environment
              name="startScopes"
              value="/testing/vo1"
              type="java.lang.String"
              override="false" />
      </service>
 
      <service name="gcube/vremanagement/VREManager">
 
           <environment
              name="name"
              value="VREManager"
              type="java.lang.String"
              override="false" />
 
           <environment
              name="RPDName"
              value="VREManagerResourceProperties"
              type="java.lang.String"
              override="false"/>
 
           <resource name="home" type="org.gcube.vremanagement.vremanager.impl.state.VREManagerHome">
             <resourceParams>
                <parameter>
                    <name>factory</name>
                    <value>org.globus.wsrf.jndi.BeanFactory</value>
                </parameter>
                <parameter>
                    <name>resourceClass</name>
                    <value>org.gcube.vremanagement.vremanager.impl.state.VREResource</value>
                </parameter>
              </resourceParams>
 
           </resource>
     </service>
</jndiConfig>

[TBC]

Verify the Installation

Once the gHN is started, the $GLOBUS_LOCATION/nohup.out file has to report (among the others) the following portType: 

gHN started at: http://host:port/wsrf/services/ with the following services:
 
GCUBE SERVICES:
...
[5]: http://host:port/wsrf/services/gcube/vremanagement/VREManager
...

Looking at the $GLOBUS_LOCATION/logs/container.fullog, the following messages related to the VREManager initialisation have to be observed: 

2009-07-14 22:17:19,986 INFO  resultsetservice.ServiceContext [ResultSetService-Initialiser,info:78] [1.141s] ResultSetService: moved to status INITIALISED
2009-07-14 22:17:20,421 INFO  contexts.ServiceContext [VREManager-Initialiser,info:78] [0.0s] VREManager: Added scope(s) [/d4science.research-infrastructures.eu]
2009-07-14 22:17:20,422 INFO  contexts.ServiceContext [VREManager-Initialiser,info:78] [0.0010s] VREManager: INITIALISING RUNNING INSTANCE
2009-07-14 22:17:20,424 INFO  contexts.ServiceContext [VREManager-Initialiser,info:78] [0.0030s] VREManager: starting in scopes [/d4science.research-infrastructures.eu]
2009-07-14 22:17:20,424 INFO  contexts.ServiceContext [VREManager-Initialiser,info:78] [0.0030s] VREManager: Added scope(s) [/d4science.research-infrastructures.eu]
2009-07-14 22:17:20,425 INFO  contexts.ServiceContext [VREManager-Initialiser,info:78] [0.0040s] VREManager: managing security with a GCUBESimpleServiceSecurityManager
2009-07-14 22:17:20,425 INFO  contexts.ServiceContext [VREManager-Initialiser,info:78] [0.0040s] VREManager: managing remote persistence with a GCUBERINoPersistenceManager
2009-07-14 22:17:20,426 INFO  contexts.GHNContext [VREManager-Initialiser,info:78] [0.0s] GHNContext: REGISTERED RI OF (VREMANAGEMENT,VREMANAGER)
2009-07-14 22:17:21,309 TRACE impl.VREManager [PortTypeConsumer,trace:82] [0.0s] VREManager: INITIALISING PORTTYPE VREMANAGER
2009-07-14 22:17:21,322 TRACE state.VREManagerHome [HomeConsumer,trace:82] [0.0s] VREManager: INITIALISING VREMANAGERHOME
2009-07-14 22:17:21,322 TRACE persistence.GCUBENoPersistenceDelegate [HomeConsumer,trace:82] GCUBENoPersistenceDelegate: initialising GCUBENoPersistenceDelegate
2009-07-14 22:17:21,323 INFO  state.VREManagerHome [HomeConsumer,info:78] [0.0010s] VREManager: managing resources in TRANSIENT mode
2009-07-14 22:17:21,326 INFO  state.VREManagerHome [HomeConsumer,info:78] [0.0040s] VREManager: activated sweeper to run every 60 seconds

Software Repository

Installation

The Software Repository can be deployed on a gHN as any other gCube Service by typing: 

gcore-deploy-service <path>/org.gcube.vremanagement.softwarerepository.gar

The command above assumes that the $GLOBUS_LOCATION/bin folder is in your PATH.

In addition, it requires that the following software are available in the $GLOBUS_LOCATION/lib folder:

All of them can be downloaded from Software Distribution Site, while the installation instructions are available in their websites.

gHN Configuration

No specific configuration is needed, but the usual gHN's one.

Instance Configuration

The Software Repository can join in multiple scope, so no specific configuration are needed. However it has a lot start-up configuration that the administrator can change as he likes in the

Verify the Installation

... 

2009-07-14 22:17:22,457 INFO  impl.ServiceContext [SoftwareRepository-Initialiser,info:78] [0.0s] SoftwareRepository: Added scope(s) [/d4science.research-infrastructures.eu]
2009-07-14 22:17:22,458 INFO  impl.ServiceContext [SoftwareRepository-Initialiser,info:78] [0.0010s] SoftwareRepository: INITIALISING RUNNING INSTANCE
2009-07-14 22:17:22,460 INFO  impl.ServiceContext [SoftwareRepository-Initialiser,info:78] [0.0030s] SoftwareRepository: starting in scopes [/d4science.research-infrastructures.eu]
2009-07-14 22:17:22,460 INFO  impl.ServiceContext [SoftwareRepository-Initialiser,info:78] [0.0030s] SoftwareRepository: Added scope(s) [/d4science.research-infrastructures.eu]
2009-07-14 22:17:22,461 INFO  impl.ServiceContext [SoftwareRepository-Initialiser,info:78] [0.0040s] SoftwareRepository: managing security with a GCUBEServiceSecurityManagerImpl
2009-07-14 22:17:22,461 INFO  impl.ServiceContext [SoftwareRepository-Initialiser,info:78] [0.0040s] SoftwareRepository: managing remote persistence with a GCUBERINoPersistenceManager
2009-07-14 22:17:22,462 INFO  contexts.GHNContext [SoftwareRepository-Initialiser,info:78] [0.0s] GHNContext: REGISTERED RI OF (VREMANAGEMENT,SOFTWAREREPOSITORY)
2009-07-14 22:17:22,539 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.082s] SoftwareRepository: banned version: 0.00.00
2009-07-14 22:17:22,540 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.083s] SoftwareRepository: regular expression for dependency version is: \s*(((\(|\[)\s*\d{1,2}.\d{1,2}.\d{1,2}\s*,\s*\d{1,2}.\d{1,2}.\d{1,2}\s*(\)|\]))|(\d{1,2}.\d{1,2}.\d{1,2}))\s*
2009-07-14 22:17:22,637 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.18s] SoftwareRepository: DB filename = /home/gcube1/gCore/etc/org.gcube.vremanagement.softwarerepository/db
2009-07-14 22:17:22,639 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.182s] SoftwareRepository: Queries file = /home/gcube1/gCore/etc/org.gcube.vremanagement.softwarerepository/dbQuery.xml
2009-07-14 22:17:22,639 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.182s] SoftwareRepository: Tmp directory = /home/gcube1/gCore/etc/org.gcube.vremanagement.softwarerepository/tmp
2009-07-14 22:17:22,640 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.183s] SoftwareRepository: Pending directory = /home/gcube1/gCore/etc/org.gcube.vremanagement.softwarerepository/pending
2009-07-14 22:17:22,640 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.183s] SoftwareRepository: Maven directory = /home/gcube1/gCore/etc/org.gcube.vremanagement.softwarerepository/maven
2009-07-14 22:17:22,640 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.183s] SoftwareRepository: Maven settings file path = settings.xml
2009-07-14 22:17:22,641 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.184s] SoftwareRepository: HTTP Server Base path = /home/gcube1/gCore/etc/org.gcube.vremanagement.softwarerepository/jetty/webapps
2009-07-14 22:17:22,642 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.185s] SoftwareRepository: HTTP Server port = 6900
2009-07-14 22:17:22,642 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.185s] SoftwareRepository: HTTP relative Maven directory = maven
2009-07-14 22:17:22,642 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.185s] SoftwareRepository: HTTP relative Report directory = report
2009-07-14 22:17:22,643 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.186s] SoftwareRepository: XSLT directory = /home/gcube1/gCore/etc/org.gcube.vremanagement.softwarerepository/xslt
2009-07-14 22:17:22,646 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.189s] SoftwareRepository: Documentation will be controlled in doc/api on each package
2009-07-14 22:17:22,646 DEBUG impl.ServiceContext [SoftwareRepository-Initialiser,debug:66] [0.189s] SoftwareRepository: On each package the file containing link with the source code should be svnpath.txt
...

[TBP]

VREModeler

Installation

The VREModeler is typically installed as any other gCube Service by typing: 

gcore-deploy-service <path>/org.gcube.vremanagement.vremodeler.gar

The command above assumes that the $GLOBUS_LOCATION/bin folder is in your PATH

In addition, the service requires that the following software are available in the $GLOBUS_LOCATION/lib folder:

gHN Configuration

No specific configuration is needed, but the usual gHN's one.

Instance Configuration

[TBP]

Verify the Installation

[TBP]

Requirements

The VREDefinitionPortlet (the VREModeler's GUI) allows (in one of its steps) the VRECreator to select a set of functionalities. A functionality is a set of services and portlets that allow the VREUser to perform specifics operations. These set of functionalities should be defined in a Generic Resource published on the IS. The Generic Resource must be defined as follow: 

<Resource>
  <ID>df899630-82ae-11de-a6cc-f15c9cf886be</ID>
  <Type>GenericResource</Type>
  <Scopes>
  </Scopes>
  <Profile>
     <SecondaryType>VREModelerResource</SecondaryType>
     <Name>FuctionalitiesResource</Name>
     <Description>
        A Generic resource containing the functionalities requested to a VRE at design time
     </Description>
     <Body>
         <MainFunctionalities>
             <MainFunctionality>
               <Name>Access Functions</Name>
               <Description>
                    This class of functions characterises the facilities that can be activated in the Virtual Research Environment to support users in requesting, locating, and accessing the Virtual Research Environment content.
               </Description>
               <Functionalities>
                  <Functionality>
                     <Name>Search (Browse, Simple, and Combined)</Name>
                     <Description>
                         By selecting this function VRE users will be provided with facilities supporting the discovery of Information Objects by issuing keyword based queries. This is the simplest modality for discovering Information Objects constituting the VRE Information Space. In addition to the specification of the keywords characterising the Information Objects the user is interested in, this function permits to restrict the Information Space in which to search by specifying the set of Collections against which the query will be evaluated.
                     </Description>
                     <Services>
                       <Service>
                          <ServiceName>FilterXPathOperator</ServiceName>
                          <ServiceClass>Search</ServiceClass>
                       </Service>
                            ... more services
                     </Services>
                     <Portlets>
                       <Portlet>userprofileeditingportlet#UserProfileEditingPortlet</Portlet>
                       <Portlet>layoutcreator#LayoutcreatorPortlet</Portlet>
                         ... more portlets
                     </Portlets>
                 </Functionality>  
                     ... more functionalities
              </Functionalities>
           </MainFunctionality>
               ... more main functionalities
        </MainFunctionalities>
      </Body>
   </Profile>
</Resource>
Retrieved from "https://wiki.gcube-system.org/index.php?title=Resource_Management_Installation&oldid=7440"