Difference between revisions of "IS-Client"

Revision as of 04:27, 14 April 2011

Role

The ISClient is set of interfaces, templates and abstract classes defined in the context of the gCore Framework to model the discovery of resources belonging an infrastructureon the IS. ISClient is also the name of the main interface for retrieving and sending queries.

A reference implementation of the ISClient is provided with the gHN distribution to interact with the concrete IS services (namely the IS-InformationCollector service).

Design

The ISClient interface exposes the following methods:

• getQuery(Class<QUERY> type) – which takes as input parameter the type of the query;
• getQuery(String name) – which takes as input parameter the name of the query;
• execute(ISQuery<RESULT> query, GCUBEScope scope) – which takes as input parameter the query and the scope and returns the list of Information Service entries matching the query.

Queries

There are three types of queries:

• pre-defined (or template) queries (GCUBEResourceQuery or WSResourceQuery)
• named queries
• caller-defined queries (GCUBEGenericQuery)

Each query is modeled by a class implementing the org.gcube.common.core.informationsystem.client.ISQuery interface. Query object are not directly instantiated but must be obtained by the ISClient library. To get any of the query objects described in the following, the getQuery() method has to be invoked as follows:

 ISClient client = GHNContext.getImplementation(ISClient.class);
 [GCUBE...Query] query = client.getQuery([GCUBE...Query].class | name);

Depending on the query, parameters and/or filters can be set to the query object to add further conditions.

Pre-defined Queries: Querying GCUBEResources

The following queries classes are available to query over gCube Resources:

• GCUBECollectionQuery.class
• GCUBECSInstanceQuery.class
• GCUBECSQuery.class
• GCUBEExternalRIQuery.class
• GCUBEGenericResourceQuery.class
• GCUBEGHNQuery.class
• GCUBEMCollectionQuery.class
• GCUBERIQuery.class ( with the implicit filters that the returned RIs are in the ready state)
• GCUBEServiceQuery.class
• GCUBETPQuery.class
• GCUBEVREQuery.class

All of them return a List of specialized org.gcube.common.core.resources.GCUBEResource objects (e.g. GCUBEServiceQuery returns a list of GCUBEService objects).

Once obtained the desired query object, the developer can add filters to better target the query on his needs.

Supported filters are:

• AtomicCondition
  • with the atomic conditions can be specified that a node with a determined path *MUST* have a specified value

 query.addAtomicConditions(new AtomicCondition("//Endpoint/@EntryName","gcube/annotationmanagement/abe/factory"));

• GenericCondition
  • with the generic conditions can be specified an entire condition expression (using $result as starting node of every used path)

  query.addGenericCondition("$result/[path] eq '[something]' or $result/[another path] eq '[something else]'");

Sample Usage

1) The following query retrieves all the HostingNode registered in the selected scope:

ISClient client = GHNContext.getImplementation(ISClient.class);
GCUBEGHNQuery GHNquery = client.getQuery(GCUBEGHNQuery.class);
for (GCUBEHostingNode node : client.execute(GHNquery,GCUBEScope.getScope("/gcube/devsec")))
   logger.debug(node.getID()+"("+node.getNodeDescription().getName()+")");

2) The following query retrieves all the RunningInstances of the Service with ServiceName equals to "ABE" in the selected scope:

ISClient client = GHNContext.getImplementation(ISClient.class);
GCUBERIQuery RIquery = client.getQuery(GCUBERIQuery.class);
RIquery.addAtomicConditions(new AtomicCondition("//ServiceName","ABE"));
for (GCUBERunningInstance instance : client.execute(RIquery,GCUBEScope.getScope("/gcube/devsec")))
   logger.debug(instance.getServiceName()+"("+instance.getID()+")");

3) The following query retrieves all the RunningInstances of the Service with ServiceName equals to "GHNManager" or "SoftwareRepository":

ISClient client = GHNContext.getImplementation(ISClient.class);
GCUBERIQuery RIquery = client.getQuery(GCUBERIQuery.class);
RIquery.addGenericCondition("$result/Profile/ServiceName/string() eq 'GHNManager' or $result/Profile/ServiceName/string() eq 'SoftwareRepository'");
for (GCUBERunningInstance instance : client.execute(RIquery,GCUBEScope.getScope("/gcube/devsec")))
    logger.debug(instance.getServiceName()+"("+instance.getID()+")");

Pre-defined Queries: Querying WS-ResourceProperties Documents

To query over GCUBEWSResources the following query class must be used:

 ISClient client = GHNContext.getImplementation(ISClient.class);
 WSResourceQuery query = client.getQuery(WSResourceQuery.class);

The query returns a List of RPDocument objects. The RPDocuments allows developer to retrieve information on WSResourceProperties or to execute XPath over its content.

Sample Usage

The following example returns all the WSResources generated by the services with ServiceClass "Sample":

ISClient client = GHNContext.getImplementation(ISClient.class);
WSResourceQuery wsquery = client.getQuery(WSResourceQuery.class);
wsquery.addAtomicConditions(new AtomicCondition("//gc:ServiceClass","Samples"));
for (RPDocument d : client.execute(wsquery,GCUBEScope.getScope("/gcube/devsec"))) 
    logger.debug(d.getEndpoint()+":+d.getVO()+":"d.evaluate(\"//MyRP\").get(0));

Named queries

get and use one of the predefined generic queries. Depending on the query, it is also possible to customize the query by setting specific parameters.

To get a predefined generic query:

 GCUBEGenericQuery query = client.getQuery("[one of the listed queries]");

to set the parameters:

query.addParameters(new QueryParameter("NAME","VALUE"));

The following queries are available with the current implementation of the ISClient:

• GCUBEResourceQuery allows to query all the gCube Resources
  • parameters:
    • TYPE
    • FILTER
    • RESULT (the default value returns IDs)
• GCUBEWSResourceQuery allows to query all the Resource Properties Documents
  • parameters:
    • FILTER
    • RESULT (the default value is the entire Properties Document Data)
• RIEndpoint searches for RI's endpoints
  • parameters:
    • NAME filters by the Service name
    • CLASS filters by the Service class
    • ENTRY filters by the entry point
• RIOnGHN returns all the RIs grouped by the GHN on which they are hosted
  • parameters
    • ID filters by the GHN id, i.e. returns the RIs hosted on that GHN
• RISpecificData:
  • NAME (Service name)
  • CLASS (Service class)
  • ENTRY (the entry point)
• GHNIDFromHostName:
  • NAME (GHN name)
  • RESULT (the default value returns Ids)
• InternalCollections
• InternalCollectionIDs
• UserCollectionIDsFromSchemaURI
  • URI (the schema uri)
• MCollectionIDForCollection
  • ID (related collection ID)
• MCollectionFormatsForCollection
  • ID (related collection ID)
• MCollectionIDFromCollectionIDAndRole
  • ID (related collection ID)
  • ROLE (secondary role)
• MCollectionIDFromMFLanguage
  • LANGUAGE (metadata format language)
• MCollectionIDFromName
  • NAME (metadata collection name)
• MCollectionIDFromSchemaURI
  • URI (schema uri)

This class of queries returns a List of XMLResult. The XMLResult object allows the developer to explore the contained document with XPath expressions by invoking the evaluate() method.

Sample Usage

The following example shows how to retrieve all the gCube Resources in scope:

ISClient client = GHNContext.getImplementation(ISClient.class);
GCUBEScope scope = ...;
GCUBEGenericQuery query = client.getQuery("GCUBEResourceQuery");
for (XMLResult result : client.execute(query,scope)) 
   logger.debug(result.evaluate("/ID/text()"));//displays a singleton list

This example that shows how to filter the previous query by using the TYPE parameter defined in the query object:

ISClient client = GHNContext.getImplementation(ISClient.class);
GCUBEScope scope = ...;
GCUBEGenericQuery query = client.getQuery("GCUBEResourceQuery");
query.addParameters(new QueryParameter("TYPE", GCUBERunningInstance.TYPE)); //only RunningInstances
for (XMLResult result : client.execute(query,scope)) 
      logger.debug(result.evaluate("/ID/text()"));

Finally, a more complete example showing how to filter the same query and customize the results:

ISClient client = GHNContext.getImplementation(ISClient.class);
GCUBEScope scope = GCUBEScope.getScope("/gcube/devsec");
GCUBEGenericQuery query = client.getQuery("GCUBEResourceQuery");
//introduce a filter (NB. parameters can be added in batches) 
query.addParameters(new QueryParameter("TYPE", GCUBERunningInstance.TYPE), //override previous setting
     new QueryParameter("FILTER","$result/Profile/ServiceClass/string() eq 'Annotation'"), //we want only Annotation RIs
     new QueryParameter ("RESULT", "$result/Profile/Description")); //we get only the Description element
for (XMLResult result : client.execute(query,scope)) 
    logger.debug(result.evaluate("//Description")); //displays a singleton list

Client-defined queries

The library also offers the possibility to execute custom queries by loading a GCUBEGenericQuery object and then set the whole query expression as follows

ISClient client =  GHNContext.getImplementation(ISClient.class);
GCUBEGenericQuery query = client.getQuery(GCUBEGenericQuery.class);
query.setExpression("myqueryexpression");

Custom queries can be over gCube Resource as well as WS-ResourceProperties documents. However, in order to successfully create them, the client has to be aware of the how the XML database organization on the IS-InformationCollector in order to target the proper collection or sub-collection of resources. Moreover, these queries can be used to retrieve generic XML Documents.

Sample Usage

The following example show how to retrieve the IDs of all the profiles stored on the Information System with a custom query:

ISClient client = GHNContext.getImplementation(ISClient.class);
GCUBEScope scope = GCUBEScope.getScope("/gcube/devsec");
GCUBEGenericQuery query = client.getQuery(GCUBEGenericQuery.class);
query.setExpression("for $Profile in collection(\"/db/Profiles\")//Document/Data/child::*[local-name()='Profile']/Resource return $Profile/ID");
List<XMLResult> result =client.execute(query, scope);
for (XMLResult resultItem :result ) {
   logger.debug(resultItem.evaluate("an XPath ... ")); 
   logger.debug(resultItem.toString());
}