Difference between revisions of "VO installation"

From Gcube Wiki
Jump to: navigation, search
Line 4: Line 4:
 
#select the [[Administrator's_Guide:How_to_set_up_a_gCube_infrastructure|gCube infrastructure]] to join
 
#select the [[Administrator's_Guide:How_to_set_up_a_gCube_infrastructure|gCube infrastructure]] to join
 
#decide the [https://wiki.gcore.research-infrastructures.eu/gCube/index.php/Scope_Management#Modelling_Scope scope] hierarchy, i.e. the name of the VO within the new infrastructure  
 
#decide the [https://wiki.gcore.research-infrastructures.eu/gCube/index.php/Scope_Management#Modelling_Scope scope] hierarchy, i.e. the name of the VO within the new infrastructure  
−
#identify at least 6 machines to turn on as gHNs (their number may vary depending on the VO needs). These machine will serve the needs for a typical exploitation scenario of the VO:  
+
#identify at least 6 machines to turn on as gHNs (their number may vary depending on the VO needs). These machine will serve the needs for a typical exploitation scenario of the VO: ''(i)'' 3 machines for the enabling services, ''(ii)'' 3 machines for the VO services (Content Management, Indexes and Metadata Management), and ''(iii)'' then consider, 2 machines for each VRE that is expected to be deployed within the VO
−
:* 3 machines for the enabling services
+
−
:* 3 machines for the VO services (Content Management, Indexes and Metadata Management)
+
−
:* plus, 2 machines for each VRE that is expected to be deployed within the VO
+
 
#[[Information_System_Installation#Service_Map|prepare a Service Map]] file for the VO scope
 
#[[Information_System_Installation#Service_Map|prepare a Service Map]] file for the VO scope
 
#install the VO enabling services:
 
#install the VO enabling services:
Line 22: Line 19:
 
##* deploy a [[VRE_Management_Installation#Software_Repository|Software Repository]] instance and configure it to join the VO scope; this is an optional step, since also the Software Repository can be joined to the new VO via the Resource Management tool
 
##* deploy a [[VRE_Management_Installation#Software_Repository|Software Repository]] instance and configure it to join the VO scope; this is an optional step, since also the Software Repository can be joined to the new VO via the Resource Management tool
 
##start the 3 containers following the order of the deployments and verify that they work properly
 
##start the 3 containers following the order of the deployments and verify that they work properly
−
#configure and start 3 gHNs to use for future dynamic deployment activities (e.g., deployment of VO level services and VRE creation)
 
−
##[https://wiki.gcore.research-infrastructures.eu/gCube/index.php/Administrator_Guide#Installation install gCore] in each machine and copy the Service Map files under the ''$GLOBUS_LOCATION/config'' folder
 
−
##[https://wiki.gcore.research-infrastructures.eu/gCube/index.php/Administrator_Guide#Configuration configure] the gHNs to join the VO scope
 
−
##[https://wiki.gcore.research-infrastructures.eu/gCube/index.php/Administrator_Guide#Verify_the_Installation start the container] on each machine and verify that the gHN is correctly published both in the infrastructure and in the VO Information Systems.
 

Revision as of 18:19, 17 December 2009

These are the steps needed to setup a new Virtual Organization:


  1. select the gCube infrastructure to join
  2. decide the scope hierarchy, i.e. the name of the VO within the new infrastructure
  3. identify at least 6 machines to turn on as gHNs (their number may vary depending on the VO needs). These machine will serve the needs for a typical exploitation scenario of the VO: (i) 3 machines for the enabling services, (ii) 3 machines for the VO services (Content Management, Indexes and Metadata Management), and (iii) then consider, 2 machines for each VRE that is expected to be deployed within the VO
  4. prepare a Service Map file for the VO scope
  5. install the VO enabling services:
    1. identify 3 machines to dedicate to the VO Enabling Services
    2. install gCore in the 3 machines and copy the Service Map files under the $GLOBUS_LOCATION/config folder
    3. configure the first gHN to join to the VO scope and
      • deploy the IS-Collector and configure it to join the VO scope
    4. configure the second gHN as ROOT and to join to the VO scope and
      • deploy a IS-Registry instance and configure it to join the VO scope
      • deploy a IS-Notifier instance and configure it to join the VO scope
    5. configure the third gHN to join it to the VO scope and
      • deploy a VREModeler instance and configure it to join the VO scope
      • deploy a VREManager instance and configure it to join the VO scope
      • deploy a Software Repository instance and configure it to join the VO scope; this is an optional step, since also the Software Repository can be joined to the new VO via the Resource Management tool
    6. start the 3 containers following the order of the deployments and verify that they work properly
Retrieved from "https://wiki.gcube-system.org/index.php?title=VO_installation&oldid=8215"